WiFi Refrigerator Scale
| Author | Message | Date | Comments |
|---|---|---|---|
| Justin B. | Exploded parts renders - cool cool this exactly what i wanted to do, just a proof of concept. we'll need to redo the camera movement and speed and stuff, but this will work. lets pause it till we need direct application (i.e. get site built and see exactly how to script it) | February 2, 2015 | 27 comments |
| Justin B. | Market/IOT research - https://www.kickstarter.com/projects/beamlabsinc/beam-the-smart-projector-that-fits-in-any-light-so?fb_action_ids=10152590142725764&fb_action_types=og.shares&fb_source=other_multiline&action_object_map=%5B735042166610382%5D&action_type_map=%5B%22og.shares%22%5D&action_ref_map=%5B%5D | December 17, 2013 | 46 comments |
| Justin B. | Photoshoot shot Template - looks good | December 2, 2014 | 3 comments |
| Taylor B. | revise base model - Screen Shot 2014-12-05 at 1.02.20 AM.png, Screen Shot 2014-12-05 at 1.11.22 AM.png | December 1, 2014 | 29 comments |
| Taylor B. | Photoshoot shot references - you thinking more environment shots? i was thinking more close up cause product is so thin, getting further back other items like jug on top of it, surrounding objects are going to overpower it and not be prominent. also will have to have better photo shoot since more is captured in bg, more setu... | December 3, 2014 | 2 comments |
| Taylor B. | Proto enclosure design ideas - Proto4_DesignIdeas.pdf | December 1, 2014 | 1 comment |
| Taylor B. | Level Logo concepts - http://www.awwwards.com/awards/images/2011/12/typeandlogo-02.jpg http://www.awwwards.com/awards/images/2011/12/typeandlogo-08.jpg http://www.awwwards.com/awards/images/2011/12/typeandlogo-04.jpg http://www.awwwards.com/awards/images/2012/12/best-logo-2013-8.jpg http://www.awwwards.com/awards/imag... | November 28, 2014 | |
| Taylor B. | Device Render shots - http://f.cl.ly/items/2M0G0U2G0m3u1a2E3E2c/Screen%20Shot%202014-11-26%20at%202.04.36%20PM.png http://f.cl.ly/items/3p3f2f29271i3P3f260f/Screen%20Shot%202014-11-26%20at%203.32.58%20PM.png http://f.cl.ly/items/3o3d060R2u3z2z3K3k0I/Screen%20Shot%202014-11-26%20at%203.05.20%20PM.png http://f.cl.ly/ite... | November 25, 2014 | 5 comments |
| Justin B. | MicroSite Wireframing Ideas - thx looks good | November 25, 2014 | 1 comment |
| Justin B. | product photo shoot - friend myle's house/kitchen, easy access to shoot here. | November 25, 2014 | 1 comment |
| Justin B. | Drop RE-naming ideas - my idea was to do that, in a sense. i.e. ill make a placeholder site for oso, as a 'dev company', but then link out to sub sites. still be cool to have one catch stand alone url… play with verb/name deviations... | March 17, 2014 | 9 comments |
| Taylor B. | Production next step Resources - dang. no idea how i didnt come across that one. using same basic scale principals. with almost same amp circuit. xbee radio is popular so i understand why they used that. interesting. | October 27, 2014 | 9 comments |
| Taylor B. | Sense photoshoot references. - Here's some shots of danons kitchen. only thing i'm worried about is the light color marble maybe not enough contrast for the white/clear 3d print? | October 22, 2014 | 1 comment |
| Taylor B. | Xively Datastream Services - we are using a dev account. they used to have a ton more info on their site and it all got chopped. keep in mind 95% of elec imp users and any other IoT hobbyist were using this. xively has taken a radical more business approach and you almost have to search out to find the dev account now. i wan... | October 29, 2014 | 7 comments |
| Justin B. | Scale Accuracy/Consitency - yeah off is fine. ill let you konw when to run it again | October 25, 2014 | 6 comments |
| Taylor B. | Working device sketch - try any sleep functions yet? | October 24, 2014 | 1 comment |
| Justin B. | Elec Imp Math functions - whew. this should be good now. have bunch more buffer logic in place for force detection as well as percent calculation. now it should only update wifi/server on init/reset, or if weight drops more than 5%. https://ide.electricimp.com/ide/models/24866/devices/2319a8eb6e4936ee | October 24, 2014 | 9 comments |
| Taylor B. | Elec Imp Sleep functions - Sleep: https://electricimp.com/docs/api/imp/sleep/ https://electricimp.com/docs/api/server/sleepfor/ last post good: http://forums.electricimp.com/discussion/202/imp-sleep-server-sleepfor-and-power-consumption/p1 Wake: https://electricimp.com/docs/resources/wakeupguide/ https://electricimp.com/do... | October 24, 2014 | |
| Taylor B. | Elec Imp battery monitor/sleep resources - http://electricimp.com/docs/api/hardware/voltage/ problem there is in the actual code they are using a specific pin. i dont think just 'hardware.voltage()' would work http://forums.adafruit.com/viewtopic.php?f=8&t=46652 http://blog.electricimp.com/post/58924766992/managing-wifis-effects-on-batter... | October 23, 2014 | |
| Taylor B. | 10/22 Sensor Calibration #'s - unweighted - 10050 16oz - 13100 32oz - 16650 48oz - 19600 64oz - 22900 96oz - 28600 128oz - 34500 | October 22, 2014 | |
| Justin B. | Elec Imp/Xively Portals - elec imp ide access taylor@ab showtime | March 17, 2014 | 3 comments |
| Taylor B. | 10/21 Enclosure Assembled Photos | October 21, 2014 | |
| Taylor B. | 10/16 Device Pinouts - k blue and orange LED's are functioning properly. need a piece of code without all that original clutter that just spits back out values to device say every 10sec (i remember there being a limit on how fast it pings, but this is device only, dont know if it counts for that). SENSOR GROUP 1 READIN... | October 16, 2014 | 1 comment |
| Taylor B. | Prototype V3 Enclosure - the legs on the sensors are longer than we need to use them in this style setup. but the way the legs are mounted in the actual sensors makes it hard to change them up. so the top is sitting higher than it needs to. if you look from the side can see thru to the open area of the base. took a guess... | October 10, 2014 | 3 comments |
| Justin B. | device code - // current as of 03/16/14 // LEDblue <- hardware.pin1; LEDwht <- hardware.pin5; LEDred <- hardware.pin9; // LEDblue.configure(DIGITAL_OUT); LEDwht.configure(DIGITAL_OUT); LEDred.configure(DIGITAL_OUT); hardware.pin2.configure(ANALOG_IN); // photocell sensor hardware.pin7.configure(ANALOG_IN); // ... | October 10, 2014 | |
| Taylor B. | 10/2 Next Steps - tired to boost voltage output range but to no avail. its fine as is. just gets up to around 1.3V on a hard impact so would prefer like 5v but arduino can read it fine now wiring circuit up from breadboard | October 2, 2014 | 30 comments |
| Taylor B. | SenseBoards - http://cloud.fleeangrybear.com/2C0m001z1V3v | September 23, 2014 | |
| Taylor B. | Prototype enclosure design - thats the only hangup now. the sensors have little plastic feet molded/pressed into the actual sensor. they are kind of high. like .300-.400" feet alone. if i chop the feet off i have to find a way to make pads welded onto the top and then find a way to align it so the top with feet is perfectly ... | September 8, 2014 | 118 comments |
| Taylor B. | Sense Next steps - 8/5 status - working hardware using all 4 sensors, will have to sacrifice 1 LED light off the ElecImp board to quickly get this version running though. Concerns, smaller footprint amplifier IC for strain gauges is more finicky than the original huge one. Will see if there's another version we can... | June 24, 2014 | 2 comments |
| Justin B. | AIR App Tech Notes/How To's - Save local copy XML internal to AIR app: http://stackoverflow.com/questions/15839963/adobe-air-3-4-saving-writing-xml-data-to-ios | May 29, 2014 | |
| Justin B. | Compile press/contact list, add to google docs (sh - add to https://docs.google.com/spreadsheet/ccc?key=0Au1jmv7cwEImdG0zR01PejRrY1B0YzJqcm1WYk54TFE&usp=drive_web#gid=0 | May 16, 2014 | 1 comment |
| Justin B. | Start laying out content for production blog - http://sense.osofurioso.com/production/wp-admin/ un: admin pw: showtime | May 15, 2014 | 1 comment |
| Taylor B. | Press Release Contact List - more inventive/electronics http://makerflux.com/ http://www.tgdaily.com/ http://www.cafeios.net/ http://postscapes.com/ http://t3n.de/ http://www.techinvestornews.com/ more food/product http://www.brit.co http://www.cnet.com/products http://www.supercompressor.com http://gigaom.com/ http://www.ps... | May 12, 2014 | 3 comments |
| Taylor B. | Sense App | May 14, 2014 | |
| Justin B. | voltage monitor - ha. figuring out voltage monitoring took all of about 5mins on the googles. voltage = hardware.voltage(), server.log( "VOLTAGE: " + voltage ); thats it. currently returning 3.3ish on the lipo. | May 13, 2014 | |
| Justin B. | App Wireframe - awesome, good job, right on what needed. | April 24, 2014 | 1 comment |
| Justin B. | Enclosure v2 - looks great, excited to get in mail. didnt come in today, really hope it gets in tomorrow so not sit on front step in rain next week | March 22, 2014 | 18 comments |
| Justin B. | PCB - seen this? https://www.circuitlab.com/ | April 18, 2014 | |
| Justin B. | V2 Detailed Photos - perfect. exactly what i was looking for. lets keep doing stuff like this as we have new things made (same on the moto device, once we pick it back up when this is more done...) | April 4, 2014 | 1 comment |
| Taylor B. | Hardware Configuration (as of 3/17) - yep those are the designated led pins. dont matter really. same signal gets sent regardless of color, ect | March 17, 2014 | 4 comments |
| Taylor B. | Flow Chart - http://cl.ly/3D1R3g3j1g0g | February 12, 2014 | 4 comments |
| Justin B. | Moulding Design/Resources - true. natch central prob wasn't the best precursor for enrollment. | January 23, 2014 | 4 comments |
| Justin B. | Prototype V1 IMP Code - here it is sans the lcd stuff (i may have missed somehting with pin setting dealing with lcd). file attached as well in case basecamp messes up formatting. #include <stdio.h> #include <homelab/adc.h> #include <homelab/delay.h> #include <homelab/pin.h> #include <homelab/module/lcd_gfx.h> // Map a ... | January 3, 2014 | 20 comments |
| Justin B. | App Build/Data - NICE. after a long list of drop integration pieces that were hard and shouldn't be, xively integration will be SIMPLE. just add feed ID to their api call like so https://api.xively.com/v2/feeds/2069217821 and boom. check data. simple json object, each of those vars is easy to grab in code just li... | January 20, 2014 | 1 comment |
| Taylor B. | Drop Pressure Sensor Config - the temp238xxxxxxxxxxxxx channel is from the serial number of the device. so its 'temp' channel + SN thus that weird string. just figured that out. | January 6, 2014 | 13 comments |
| Taylor B. | 3D Printing - finalBase1.jpg, finalBase2.jpg, finalBase3.jpg, finalPlate1.jpg, finalPlate2.jpg | December 30, 2013 | 1 comment |
| Justin B. | Physical Device Design - yeah was thinking the circle portion could be the actual base, then have the pressure sensor on top of it, that way the entire thing is sort of a floating scale... | December 20, 2013 | 23 comments |